Type-3 secretion systems are sophisticated syringe-like nanomachines present in many animal and plant Gram-negative pathogens. They are capable of translocating an arsenal of specific bacterial toxins (effector proteins) from the prokaryotic cytoplasm across the three biological membranes directly into the eukaryotic cytosol, some of which modulate host cell mechanisms for the benefit of the pathogen. They populate a particular biological niche, which is maintained by specific, pathogen-dependent effectors. In contrast, the needle complex, which is the central component of this specialized protein delivery machine, is structurally well-conserved. It is a large supramolecular cylindrical structure composed of multiple copies of a relatively small subset of proteins, is embedded in the bacterial membranes and protrudes from the pathogen's surface with a needle filament. A central channel traverses the entire needle complex, and serves as a hollow conduit for proteins destined to travel this secretion pathway. In the past few years, there has been a tremendous increase in an understanding on both the structural and the mechanistic level. This review will thus focus on new insights of this remarkable molecular machine.
1. Type-3 secretion systems are complex systems—from structure to mechanism
Many animal as well as plant pathogens share the same principles to infect host cell organisms: they translocate specific bacterial toxins (collectively called ‘effector proteins’), which originate from the bacterial cytoplasm directly into the cytoplasm of a eukaryotic host cell. As a consequence, translocated effector proteins have the remarkable capacity to modulate various host-cell pathways, including endocytic trafficking, gene expression, programmed cell death or cytoskeleton dynamics that induce membrane ruffling and subsequently make the host accessible to bacterial infection [1,2]. At the heart of this process stands the type-3 secretion system (T3SS), a protein-delivery machine, which establishes intimate contact between the micro-organism and the eukaryotic host. It is therefore believed that it allows the safe and unidirectional passage of specific effectors into the host cell. The destination of many effectors is the host cell cytoplasm, the host-cell membrane or the extracellular environment [3,4]. These systems are widespread among Gram-negative animal pathogens, such as Yersinia, Pseudomonas, Shigella, enteropathogenic and enterohaemorrhagic Escherichia coli (EPEC and EHEC, respectively), or Salmonella, and the plant pathogens Erwinia, Ralstonia or Xanthomonas. They are often essential for the onset of a diversity of diseases ranging from diarrhoea, bubonic plague or even fatal outcomes, to fire blight and bacterial wilt, respectively . While, in principle, the task of translocating proteins from one compartment to the other has been solved in nature previously (for example the targeting and/or secretion of proteins through the Sec- or the Tat-system), the contextual situation is complicated: translocation must occur through a number of environments such as the cytosol, the periplasm and the extracellular space. Consequently, the function of a T3SS system is complex in both the specific mechanistic details and the organization of all individual components involved. For simplicity, in this review, we will primarily focus on recent insights obtained on the Salmonella-specific T3SS but will add additional information from other systems such as Shigella or Yersinia for comparison. (Homologous components from various species are listed in table 1.)
2. Activity of type-3 secretion systems during infection
The initiating event for many Gram-negative bacterial infections is the activity of the T3SS, which mediates intimate contact between a single bacterium and the eukaryotic host cell (figure 1a). In Salmonella, this T3SS is encoded on a specific gene cluster (Salmonella pathogenicity island (SPI-1); figure 1b and table 1) on the bacterial chromosome and translocates effectors during the invasion phase of epithelium cells. The effectors trigger host cellular responses essential for the bacterial pathogenicity ; for example, the host cell's actin cytoskeleton network is remodelled and membrane ruffling occurs, which allows the bacteria to be engulfed into non-phagocytic cells. Shortly after internalization, Salmonella resides on a membrane-bound compartment similar to early endosomes. However, these compartments segregate from the prototypical endocytotic pathway, avoid fusion with degradative compartments  and establish an intracellular replicative niche. The maturation into a replicative environment (SCV, Salmonella-containing vacuole) requires the activity of a second T3SS, which is expressed about 3 h post-infection, encoded on a second pathogenicity island (SPI-2; figure 1a) [8,9]. Effector proteins modifying the microtubule-associated motor proteins dynein and kinesin furthermore influence the intracellular positioning of the SCV leading to a highly associated interaction with the Golgi network and ensure the proper maintenance of the SCV [10–14]. The consecutive action of both SPI-1 and SPI-2 T3SSs allow Salmonella not only to invade eukaryotic hosts but also to modify their cell machinery, such that the bacterium becomes able to evade the host's defence mechanism and to replicate and spread in a protected environment (see the study of Coburn et al.  for a more complete description of T3SS and corresponding diseases). During recent years, most of our understanding about mechanistic insights, including structural information, was obtained from the SPI-1-encoded T3SS, which will be the further focus of this review.
3. The needle complex: the structural core of type-3 secretion systems
The core and probably the most prominent structure of the T3SS (SPI-1) is the needle complex (figure 2), a ‘syringe’-like multi-component system. It was first visualized from Salmonella more than a decade ago , and subsequently also from other bacteria, such as Shigella [16,17] or EPEC . Overall, the needle complex is a large (approx. 30 × 80 nm), cylindrical complex, which in its native environment is embedded in both the inner (IM) and the outer membrane (OM); it spans the periplasmic space and protrudes into the extracellular environment with a needle filament. Its overall architecture provides a structural framework for a direct connection of the bacterial and host cell cytoplasm and delineates the secretion path through the needle complex. Although the needle complex is about 3.5 MDa in size, its overall shape is dictated by only a relatively small subset of proteins . Over the past few years, we have witnessed a tremendous insight into the overall architecture obtained by nuclear magnetic resonance (NMR) and/or X-ray crystallography for individual proteins, and electron microscopy for assembled needle complexes. While the needle filament is a helical polymer [19,20] of more than 100 individual monomers of a single approximately 10 kDa protein (PrgI), the membrane embedded base is composed of multiple copies of three proteins (InvG, PrgH and PrgK)  (figures 1b and 3a). From the first three-dimensional reconstructions from negatively stained  and cryo-electron microscopy images  of isolated needle complexes from Shigella or Salmonella, respectively, it became clear that both bases are organized into several ring-like structures of different diameters, suggesting a close evolutionary relationship between different T3SSs [5,54,55]. More recently, these reconstructions have been significantly improved to 5–10 Å for fully hydrated, vitrified needle complexes from Salmonella  and to 21–25 Å for negatively stained complexes from Shigella  (figure 2). In comparison, the overall shape is similar; however, differences are seen at all individual levels. In particular, the highly oligomeric needle complex from Salmonella displays a threefold symmetry in which 15 subunits of the OM neck ring connect to 24 subunits of the IM ring (figure 2a). Moreover, the reconstruction from approximately 37 000 individual particles from vitrified needle complexes revealed an organization of the cup and socket into individual subunits, which probably defines the entry pathway for substrates, and/or serves as an adaptor to the inner rod/helical filament, respectively. The image analysis also showed that the most rigid substructures are individually resembled by the inner ring/neck and the OM ring, which are flexibly connected at the constriction within the neck. Also, the lower ring, IR2, displays various conformations or compositional differences. The needle complex from Shigella was reconstructed from a selected group of 41 negatively stained particles. By applying a 12-fold symmetry, individual subunits were reported throughout the complex  (figure 2b): For example, the 24 subunits of the inner ring, which are not equally spaced, or the 12 spokes connecting the socket/cup with the IM ring clearly demarcate differences to the needle complex from Salmonella. A direct comparison will be possible once the Shigella needle complex structure is solved by cryo-electron microscopy and single particle reconstruction.
Recently, needle complexes of Salmonella have been selectively disassembled into stable individual rings: the OM ring, which is composed of the OM protein InvG, and the IM ring, which is constituted by the IM proteins PrgH and PrgK [21,56].
4. The inner membrane protein ring
The IM ring is composed of two IM proteins (PrgH/PrgK) and represents the largest ring visualized within the needle complex . The first structure of the base complex proteins reported came from NMR experiments of a truncated form of EscJ (PrgK homologue), in which a two-domain structure with a flexible linker was described . Subsequently, a triple mutant of the PrgK-homologue EscJ was crystallized, confirming the two-domain structure  (figure 3a). Based on the crystal packing, in which 24 monomers arranged in a superhelix in the crystal lattice covered one full helical turn (figure 3b), it was speculated that EscJ/PrgK on its own is able to form a ring accommodating 24 monomers, which then also would represent the initial platform for needle complex assembly. As such, a model would predict the formation of an EscJ/PrgK-ring sometime during the assembly process. It will be interesting to see whether such rings can be isolated in future. The dimensions of the proposed modelled ring, however, are smaller than the largest IM dimensions measured from electron microscopy images from side views of isolated complexes, suggesting an additional role of the second protein (PrgH). Recently, it has been possible to obtain an end-on view of IM rings by selective disassembly of previously assembled and isolated needle complexes [21,56]. From this analysis, it became clear that the IM ring is organized into two concentric rings with different diameters (figure 3b): the smaller ring matches the proposed and modelled EscJ ring . This suggests that PrgH and PrgK individually form the two concentric rings, and that the PrgK ring is shielded by embracement of a larger (PrgH) ring together with the lower neck OM on top of IR1. This architecture is also consistent with data obtained by mass spectrometry in which the accessibility of chemical derivatization of PrgK was measured in a mutant complex lacking the OM protein ring InvG [42,56]. Similar to the PrgK ring, the larger PrgH ring clearly shows 24 equally spaced individual subunits [56,57]. The accessibility for chemical derivatization and also nano-gold labelling established that the larger inner ring consists of PrgH monomers .
Both PrgH and PrgK display a predicted single alpha-helical transmembrane domain (TM); however, only PrgK harbours a prototypical signal sequence at its N-terminus that is cleaved after membrane insertion. As a consequence, the two proteins are topologically inverted with respect to each other, as has been experimentally shown by specific nano-gold labelling of isolated needle complexes . While the transmembrane domain in PrgH separates the protein into two parts of similar size, PrgK is mainly organized as a large N-terminal domain followed by the TM- and a short C-terminal domain. Taken together, the C-terminal domain of PrgH and the N-terminal domain of PrgK are localized periplasmically, and the N-terminal domain of PrgH and C-terminal domain of PrgK face the bacterial cytoplasm. Within the needle complex, the periplasmically associated IM ring has been referred to as IR1, but the cytoplasmically associated domain as IR2 (figure 2a). Recently, the C-terminal domain of PrgH residing in IR1 has been solved to atomic resolution . This domain is organized into a modular arrangement of a repeated pattern (αββαβ (D2-domain)), similar to what has been observed in EscJ. It has been hypothesized that this motif is responsible for ring formation (figure 3a). In fact, PrgH contains two D2 domains; however, in contrast to EscJ, it does not crystallize in a helical or ring-like arrangement. Within the cytoplasmic ring IR2, about 140 amino acids of the N-terminal domain of PrgH and 30 amino acids of the C-terminal tail of PrgK are present. The N-terminal PrgH domain is predicted to fold into a forkhead-associated domain (FHA), which was confirmed recently by solving the structure of its homologue from Shigella by NMR  (figure 3a). The FHA domains are known to bind to phospho-threonine peptides in cell-signalling molecules . In the context of T3SS, this would feed an attractive hypothesis for phosphorylation-dependent regulation or modulation of effector protein translocation. However, the putative phosphate-binding pocket neither aligns with the FHA domain nor does it bind phospho-threonine . It is therefore unclear whether this domain plays a regulatory role in using a different unknown mechanism.
5. The outer membrane protein ring and the neck
Members of the OM protein belong to the secretin family . This family is characterized by proteins forming higher ordered ring-like structures in the OM of Gram-negative bacteria, where they are required for the assembly of the T3SS and the T2SS [60,61] or extrusion of filamentous phages type IV [62–64]. Secretins are multi-domain proteins that are disposed in a cylindrical arrangement with an open end on both sides. In T3SS, secretins not only form the OM rings but also the neck, which reaches far into the periplasm and docks directly onto IR1 [38,56]. This structure consists of multiple copies of the protein InvG showing 15 subunits . For the Shigella needle complex, 12 subunits have been suggested as the most likely configuration , and 12–14 for other secretins [60,64–67]. This could indicate that the secretin family has evolved into a ring-forming protein family that is able to adopt different symmetries, probably to optimize their function in the respective systems. It should, however, be noted, that different techniques have been used to measure the number of subunits in the past, and it would be worthwhile to revisit the question of oligomericity within the secretin family using a more systematic and comparable analysis.
The only atomic structure of type-3 secretin (InvG) available is from the first two domains of the homologue EscC  (figure 3a). In addition, the structure of three domains of GspD, a secretin present in the type-2 secretion system has also been reported recently . Despite the lack of sequence identity, the N-terminal domain of EscC shows structural similarity to the first domain (D1) of EscJ/PrgK with a βαββα-fold, and as such has been speculated to be a conserved ring-forming motif . However, the D1 domain is also present in systems that do not form higher oligomeric rings, such as phage systems that bind peptidoglycan or in eukaryotic RNA and DNA KH domains [69,70]. This indicates that this domain has been functionally exploited by other systems. It is therefore still under debate whether the structural motif present is sufficient and/or necessary to form ring-like structures.
6. The extracellular components: the needle filament, the tip and the translocon
The most prominent extracellular component of the T3SS is the needle filament [17,71–73], which protrudes from the bacterial OM and consequently establishes an extracellular ‘secretion tunnel’ to the host cell. The helical needle is built up of more than 100 copies  of a small protein (PrgI/YscF/MxiH (Salmonella/Yersinia/Shigella) <10 kDa). Native needles have a typical length varying from 30 to 70 nm and an outer diameter of about 10–13 nm [20,23,75]. Assembly of the needle filament requires first the transport to and then the polymerization of individual monomers at the distal end of the complex. While the transport requires the activity of the T3-specific ATPase (InvC), which presumably unfolds PrgI monomers like other T3-substrates , the polymerization itself is ATP-independent and occurs in two distinct steps: nucleation and elongation . During this process, needle subunits have to be refolded . The helical parameters of the assembled needle vary from 5.6 subunits per turn in Shigella  to 6.3 in Salmonella . The length of the growing needle filament is under the control of another component (InvJ (Salmonella), Spa32 (Shigella), or YscP (Yersinia)) [72,75,78–80]; however, the precise mechanism of needle length control is under debate . A recently published structure of truncated PrgI showed that the soluble monomer comprises a helical core and flexible termini (Asp11–Thr18 and Gln61–Asn78) . Starting from Gly19 to the C-terminus, PrgI adopts an α-helical hairpin conformation (as shown by X-ray crystallography; figure 3c) which, according to the NMR studies, is further extended from Asp11 to Thr18. Additionally, both structures indicate that the C-terminus of the unpolymerized protein is α-helical but changes its conformation into two extended strands upon assembly. The MxiH (Shigella) monomer adopts a similar fold  (figure 3c), and revealed two long α-helices, connected by a Pro-Ser-Asn-Pro turn. The first helix can further be divided into a head and a tail region. NMR and mutational studies showed that this turn together with the head region are involved in the MxiH interaction with the tip protein IpaD [34,82]. By positioning the crystal structure of a monomeric MxiH into a previously generated electron microscopy density map, a model was generated in which the N-terminal helix of MxiH is facing the inner channel of the filament, while the C-terminal one is suspected to be involved in its assembly [23,34].
The T3SS needle filament ends distally in the so-called tip complex formed by multiple copies of an adaptor protein SipD (Salmonella) [83–86], and is involved in regulating the secretion process as well as positioning onto the translocation pore in the host cell membrane [87–91]. The structure of SipD has been solved recently [28,92] and shown to be predominantly α-helical, and can be divided into three structurally distinct domains: the N-terminal self-chaperoning domain-1 that impedes the interaction and comprises two α helices, the central domain-2 that adopts a coiled-coil structure with two helices (47 and 52 amino acids in length), linked to domain-3 showing a mixed α/β-structure. The latter two domains mediate binding of SipD to PrgI, as demonstrated by isothermic titration calorimetry . To better understand the interaction of needle filament monomers (PrgI) and tip proteins (SipD), the structure of SipD fused to PrgI was solved. Subsequently, a pentameric tip-complex was modelled in silico, which could represent the configuration that interacts with the bacterially deployed translocon proteins that presumably form a pore-like structure for the passage of T3 effectors through the eukaryotic host cell membrane. Tip (SipD) and translocon (SipB, SipC) are essential for the intimate contact between bacteria and host cells and have been speculated to play an important role in host-sensing and activation of late T3 effector protein secretion [83,84,93,94]. However, the underlying mechanistic details are still to be uncovered.
7. The blueprint of the needle complex to sub-nanometre resolution
A big step forward in the understanding of the architecture of the needle complex came from the first electron microscopy reconstruction of isolated needle complexes a few years ago [22,53]. At low resolution (17 and 25 Å, respectively), the organization of the base in a series of rings could be depicted, new structural elements, such as the inner rod, the socket and the cup were identified for the first time . However, profound differences, such as the ‘spokes’ in the Shigella needle complex, which are not present in complexes of Salmonella were described . At this low resolution, conformational changes have been recognized as they occur during the assembly from the base to the fully assembled needle complex . This indicates that the underlying building blocks (PrgH, PrgK, InvG) must be organized in a way that guarantees stability to maintain a structural scaffold, and sufficient flexibility as required during assembly at the same time. However, subsequent attempts to ‘dock’ the previously obtained atomic structures from the individual proteins into the context of the needle complex allowed at best a rough positioning [22,38,56,95]. As a result, a series of incompatible models with ambiguous placement of protein domains was reported. Most recently, the structure of the needle complex from Salmonella has been solved to sub-nanometre resolution by cryo-electron microscopy and single-particle analysis . At such a resolution (5–10 Å), fine details, such as alpha helices, became visible and precise docking could be performed. As indicated from the analysis of oligomericity of the individual rings, which showed 15 subunits of the outer ring/neck and 24 subunits of the inner ring it was suggested that the entire needle complex displays an overall three-fold symmetry. This would imply that a local symmetry mismatch exists, in which five of the OR/neck subunits are positioned over eight IR1 subunits. In fact, a threefold symmetry of entire needle complexes (figure 2a) could be elegantly demonstrated by a change in the observation angle of complexes : as the preferential side-view orientation of the particles on the electron microscopy grid precludes a thorough symmetry analysis, the particle orientation was changed to end-on views by modulating the protonation state of polyhistidine tags introduced in PrgH.
Symmetrization over the asymmetric unit within the individual rings allowed the resolution in these regions to be increased further (figure 4a). Subsequent docking revealed the precise organization of individual proteins within and between the individual rings in the context of the needle complex: the periplasmic IR1 is composed of the two individual concentric rings established by C-terminal PrgH (larger ring) and N-terminal PrgK domains (smaller ring), both of which harbour 24 monomers within each ring (figure 4b,c). On top of IR1 the ‘lower neck’ associates; this is composed of 15 monomers of the N-terminal domain of InvG (figure 4d). The close interaction between these two rings was further independently confirmed by cross-linking and mass spectrometry experiments as well as by mutational analysis [56,95]. Interestingly, the last 30 amino acids in PrgH are not structured in a crystal, indicating that the C-terminal tail confers some flexibility . Such flexibility might in fact be necessary during the assembly, in which the neck undergoes large conformational changes by moving outwards in order to accommodate the inner rod . Moreover, the C-terminal tail of PrgH, is required for the stability of the complex, as removing the last four amino acids causes the complex to be less stable . Removal of six amino acids already led to strains that are not able to secrete effectors , most probably because of the lack of formation of complexes.
While overall IR1 appears rather rigid in needle complexes, the cytoplasmic IR2 is very flexible. It is possible that this flexibility might occur because of a rather loose transmembrane connection to IR1 in solubilized complexes and is decreased when present in its native membrane environment. A subsequent prerequisite for a precise docking of the N-terminal PrgH FHA domain, modelled based on the recently solved PrgH homologue MxiG from Shigella , within the IR2 of the Salmonella needle complex would, however, require an improved map of that particular region, which eventually could be obtained, for example, by increasing the rigidity of this region.
Electron microscopic analysis also revealed a likely configuration of the socket and the cup in individual subunits. This structure has been associated with a group of highly conserved membrane proteins (SpaP, SpaQ, SpaR, SpaS, InvA in the case of Salmonella) , which have been collectively called the ‘export apparatus’. These proteins have been shown to play an essential role during the assembly into functional needle complexes. Although cytoplasmic domains of InvA [45,46] and SpaS  have been solved crystallographically, additional information about stoichiometry and localization of the individual export apparatus proteins is required to define precisely their organization within the needle complex.
8. Assembly of the injectisome
Assembly of the approximately 3.5 MDa needle complex is a highly regulated and coordinated process. Currently, two models have been put forward that originate from studies in the Yersinia and Salmonella systems: the outside-in and the inside-out model, respectively [96,97]. Both models are characterized by two phases: the early phase (ring formation) is independent of the functional activity of the type-3 specific ATPase, YscN (Yersinia) and InvC (Salmonella), whereas the successful completion of the subsequent phase (inner rod/filament formation) depends on the ATPase activity.
In the outside-in model (Yersinia) (figure 5a) [97,98], the formation of the needle complex is initiated by the formation of the secretin ring (YscC) in the OM. Subsequently, the IM protein YscD (PrgH homologue and larger ring of the IM ring) associates with the secretin ring. In parallel, the essential export apparatus proteins YscR, YscS, YscT, YscU and YscV, which are believed later to recognize export substrates , oligomerize independently. Together, these two substructures recruit YscJ (PrgK homologue) monomers, presumably by sequential attachment to form the smaller IM ring. The ATPase (YscN) and the C ring (YscK, YscL, YscQ) complex assemble synchronously on the cytoplasmic side of the needle complex. In this model, the export apparatus proteins must somehow diffuse laterally into the larger IM ring to integrate to the central part of the needle complex. It is, however, also possible that such an integration could be directly performed co-translationally, which then requires a precise targeting of export apparatus translating ribosomes to the needle complex. In order to finalize the assembly, the ATPase activity is required for the transport of substrates, such as the needle filament and needle-tip proteins.
In the inside-out model (Salmonella) (figure 5b) , assembly nucleates with the export apparatus, which is intimately associated with the needle complex and is composed of a set of conserved membrane proteins (InvA, SpaP, SpaQ, SpaR and SpaS) . In particular, in this model the assembly is initiated first by the formation of a nucleation complex of the two export apparatus proteins SpaP and SpaR. Subsequently, the other two export apparatus proteins SpaQ and SpaS bind to the nucleation complex. Then, multiple copies of the IM proteins PrgH and PrgK as well as the OM protein InvG organize as rings laterally in their respective membrane to form the base of the needle complex. Interestingly, formation into a base-like structure lacking the export apparatus proteins has been shown to be possible , suggesting that the underlying ring-forming building blocks have the capability to establish a membrane-embedded complex. The lack of export apparatus proteins yielded complexes devoid of the socket/cup substructure with an overall decreased stability. In addition, the assembly stalls at a base-like complex, demonstrating that the export apparatus proteins are responsible for both the stability of the complex and the assembly into functional needle complexes. Wild-type bases are then traversed by an inner rod (PrgJ) and extended with an extracellular helical needle filament (PrgI) to build up a 25–30 Å wide conduit for protein transport into a later assembly phase . The transport of PrgJ and PrgI monomers is dependent upon and intimately connected to the ATPase activity of InvC . Completion of PrgJ and PrgI transport and incorporation into the needle complex correlates with both large conformational changes observed in the base  and with a change in the substrate specificity from secreting the structural proteins (PrgI and PrgJ) to the translocon and effector proteins.
9. Substrate secretion—timing, regulation and mechanisms
Substrate secretion is a highly orchestrated process in T3SSs. It occurs at various stages during the lifetime of the system, and substrates are secreted in a sequential order. We therefore refer to ‘early’ (inner rod/filament), ‘mid’ (translocases) and ‘late’ (effectors) substrates (figure 6). In Salmonella, the early substrates are the structural sub-component proteins PrgJ and PrgI, which form the inner rod and the helical filament structure of the needle complex. In order to establish a physical connection for protein translocation from the bacterial to the eukaryotic cytoplasm, the mid-substrates, SipD, SipB and SipC, are transported. They constitute the needle tip and a pore-like translocon which is embedded in the eukaryotic host cell membrane . This guarantees that late substrates (effectors) are safely translocated directly from the bacterial to the eukaryotic cytoplasm through a number of hostile environments (inner and outer bacterial membrane, periplasmic and extracellular space, host cell membrane). While the recognition of being a type-3 substrate is not fully understood in detail, many substrates, require the coexistence with a cognate chaperone. In Salmonella, for example, the effector protein SptP harbours an N-terminal domain of approximately 160 amino acids, which binds the acidic chaperone SicP with nanomolar affinities. Recent studies have shown that a high molecular weight complex of the cytoplasmic proteins SpaO/OrgA/OrgB forms independently of the presence of needle complexes . This complex appears to serve as a binding platform for substrates destined to be translocated via the needle complex, as chaperone–effector complexes bind via the chaperone to this platform. SpaO/OrgA/OrgB also functions as a sorting platform probably through different affinities of various chaperone–effector complexes and thus determines the order of secreted effectors. As only effector proteins but not chaperones are secreted, the latter are released through the activity of the ATPase (InvC). From in vitro assays, it has been shown that ATP binding and ATP hydrolysis are not only required to dissociate chaperones from effectors but also to further unfold the effector proteins as they can only be secreted in an at least partially unfolded state. The proton motive force has been implied in substrate transport of T3SSs ; the precise mechanism, however, remains elusive .
T3SSs are one of the most exciting discoveries over the past couple of years in the field of bacterial pathogenesis. Their efficient and conserved central role in the physical interaction of many pathogenic bacteria and their hosts opens up the possibility for therapeutic intervention. A prerequisite, however, is a detailed knowledge about mechanistic and structural details. The complex nature of the multi-component system which assembles into supramolecular structures requires an integrated analytical approach. While conventional structural technologies (X-ray and NMR) were highly successful in obtaining atomic details of individual components of the system, cryo-electron microscopy allowed us to bring these pieces together and draw the blueprint of the core component at high precision. Although a few grey areas are still to be explored, the T3SS and the blueprint of the needle complex may already be used to develop novel strategies to prevent bacterial infections.
We would like to thank members of the Marlovits laboratory for their comments on this manuscript. L.K. received funding through a predoctoral Boehringer Ingelheim Fonds fellowship. Research in the Marlovits laboratory is supported from the ZIT (Center for Innovation and Technology, City of Vienna, Austria, Grant: CMCN-V Center for Molecular and Cellular Nanostructure Vienna), from the Research Institute of Molecular Biotechnology of the Austrian Academy of Sciences (IMBA) and from the Research Institute of Molecular Pathology (IMP).
One contribution of 11 to a Theme Issue ‘Bacterial protein secretion comes of age’.
- This journal is © 2012 The Royal Society